Application of equipment
Used for secondary vulcanization of rubber products to improve the physical properties of products.It is suitable for the high requirement secondary vulcanization of rubber products’ surface roughness , ensure the smoothness of products.
Characteristics of equipment
1.The inner and outer surface of the equipment is made of 1.5mm thick
304 stainless steel plates to prevent corrosion of rust.
2.100 mm salt cotton insulation, heat preservation performance is strong,work is the outer wall temperature is not more than 35 ℃;
3.The high temperature resistance long shaft motor turbine fan, the hot air circulation is efficient and saves electricity.
4.Using octagonal drum (600 litres), the roller will turn the vulcanized product and ensure that the surface of the product is fully heated.
5.Temperature can be adjusted freely between at room temperature to 260 ℃
6.Omron temperature PID controller, output 4-20ma continuous control SSR, avoid frequent start-stop heaters;Small temperature error and high control precision
7.Using Delta control,stable and reliable,Monitor the picture information fully and monitor the running status of the equipment;
8.Double overtemperature protection, safe and reliable
9.Vulcanizing time can be setted from 0 to 99.99 hours freely, time to automatic stop heater with sound warning;
Technical Parameters
Outside Dimension: 1300（W）*1600（H）*1300（T）mm
Roller: 900（Diameter 600、400 optional）*1000mm、
Highest temperture: 280℃
Air Volume: 3000 CBM/H
Power: 380V/AC、50Hz
Heater power: 10.5kw
Motor Power: Circulating Fan 0.75kw、Roller motor 0.75kw、
Fresh air Fan 0.75kw
Details
|
Item No.
|
Volume
Unit: L
|
Temperature range
Unit: ℃
|
Outside dimension
Unit: mm
|
|
XCJ-K400
|
400
|
Indoor Temp-280
|
1300*1600*900
|
|
XCJ-K600
|
600
|
Indoor Temp-280
|
1300*1600*1100
|
|
XCJ-K900
|
900
|
Indoor Temp-280
|
1300*1600*1300
|
Xiamen Xingchangjia Non-standard automation equipment Co.,l td.